| |
| Home > Products > Sensors, Transmitters and Controllers > Flow > Switch / Flow |
|
|
| |
Switch / Flow |
|
| |
|
|
| |
Type 8010 - Inline Paddle Wheel Flow Switch |
|
| |
| |
|
|
| |
The type 8010 is not available anymore since 1/1/23. |
|
| |
If you have any questions, please contact us. |
|
|
|
|
| |
|
|
 |
| |
| |
Type Description |
|
| |
The Inline flow switch Type 8010 is specially designed for use in pure and water resembling fluids, free from air bubbles and magnetizable particles, to monitor minimum/ maximum values of flow. The switch is made up of a sensor-fitting (Type S010) and a transmitter (Type SE10), quickly and easily connected together by a Quarter-Turn. This device indicates the presence of a flow in the pipe by switching the Reed contact contained in the transmitter. The switching points min./max. for rising and falling velocities can be set with a screw within a defined range. Two transmitter variants are available: -Normally open (NO): The flow switches on the contact. - Normally closed (NC): The flow switches off the contact. These S010 sensor-fittings with different process connections are available in two versions: - with a short blade “Range 1” fitted for the fittings DN 15 to DN 40 - with a long blade “Range 2” fitted for the fittings DN 32 to DN 50. |
|
| |
|
|
| |
Features |
|
| |
« Economic integration in pipe systems without any additional piping |
|
| |
« Magnetic measuring principle |
|
| |
« Mechanical adjustment of setpoint |
|
| |
|
|
|
|
|
|
|
|
| |
|
|
|
| |
|
|
|
|
中文
蘇公網(wǎng)安備32050502000264號(hào)